R&D PROCESS
In the manufacturing process, from the production of touch sensor to the assembly and manufacturing of touch screens, every production process is closely related to the research and development technology. The R&D achievements of WIWOTOUCH's R&D team always injects fresh blood into the production and manufacturing process, improves the production process, and increases the production efficiency.
Float Glass
Typically made from soda Lime glass, or Low Ion Glass (Water white glass)
Advantage:
A cost effective solution
High visible light transmittance
Excellent chemical properties and wear resistance
With excellent impact resistance and durability
Range of thicknesses - 0.55mm, 0.7mm, 1.1mm, 1.6mm, 1.8mm, 2.0mm, 3.0mm, 4.0mm, 5.0mm,6.0mm, 8.0mm, 12mm
Anti-reflective glass
Anti-reflection coating reduces reflections by a factor of ten to less than 0.5%. The visible light transmittance of glass is increased from 89% to more than 95%, and the reflected light is decreased from 8% to less than 5%.
Advantage:
A design suitable for outdoor
Suitable for use under bright light
Anti- Glare Etched Glass
Its principle is to process the high quality glass on one or both sides, so that it has a lower reflection ratio compared with ordinary glass.
Advantage:
An ideal solution for a range of displays
Reduce ambient light interference
Improve the sharpness of the picture and reduce screen reflection
Thermally hardened and toughened Glass
Our thermally hardened glass is twice as strong as standard tempered glass and five times stronger than untempered glass.
Advantage:
Can be used in extreme and challenging environments. Moreover hardened and toughened glass has a high impact resistance.
Impact resistance (IK07-IK10)
Photo lithography Process
Advantage:
Due to the needs of special applications, product development of photo lithography process is indispensable.
The minimum line width and line spacing of photo lithography process ITO pattern is 10-15μm.
The touch screen of photo lithography process can withstand ultra-low temperature -45°C and ultra-high temperature +85°C.
Laser etching process of ITO glass & ITO film
The chemical reaction between a specific Liquor and the ITO layer can remove the parts that are not covered by photoresistance, thus achieving the purpose of etching.
The mini line width/ trace spacing of ITO pattern is 35μm.
Automatic & semi-automatic process of CTP assembly / CTP bonding with LCD
The automatic production line can increase the production efficiency by more than 50%, and the yield of bonding process is up to 99%.
The semi-automatic production line can be flexibly adjusted to fit the different product size, the operation space is relatively unrestricted.
Optical bonding
optical bonding service can be incorporated into a variety of optical displays, cover lens’s and touch screens. Our new class 100 clean room bonding facility ensures unparalleled quality. With our extensive knowledge WIWOTOUCH can assist you throughout the process from initial design and material selection to final production. We can also assist you in choosing suitable touch screens and other optical display configurations.
Advantage:
mproved Sunlight Readability:
Decreases reflection on the display glass from external light source, hence improves the contrast ratio.
Shock-resistant:
Adhesive is soft and not brittle
Re-workable process:
High yield:1%~3% yield loss of display,1%yield loss of cover lens and touch panel
Improved Luminance:
Reduces light loss from backlight units which increases luminance for about 8%
Sensor Manufacturing
Automaic Press
Oven
Cleaning line
Laser machine
UV machine
Glass cutting machine
TP Manufacturing
FOG Testing
Adsorption machine
Binding Press
FPC Testing
Three station laminating machine
Vacuum laminating machine
Laboratory equipment
R-Drop Tester
R-Humidity Chamber
R-Salt spray Tester
R-SIZE Tester
R-Tensile Tester
R-TransmittanceHaze teser
FUJIAN WIWO ELECTRONIC TECHNOLOGY CO., LTD.
Fax: 0086-596-2607905
Email: info@tito-touchscreen.com
Add: 1st Floor, 2nd Building, Jingfeng Economic Development Zone,Xiangcheng District, Zhangzhou City, Fujian, China 363000
Copyright @ 2020 Fujian Wiwo Electronic Technology Co., Ltd.
闽ICP备2022004610号-1 Powered by：300.cn
Copyright @ 2020 Fujian Wiwo Electronic Technology Co., Ltd.
Powered by：300.cn SEO
